The TCT-700 by GoldTools is to test for Sending/Tracing a tone, Cable continuity, Coaxial, Polarity or to Verify a line. The LAN Tracer is designed to identify and trace wires or cables within a group without damaging the insulation.

4 Piece network basic toolkit

the 6mm Anchor is placed through the object and into the wall where after the nail is driven in all the way to enable expansion of the sleeve inside the hole. The same size hole should be drilled in the object and the surface it’s mounted to.

This tool will crimp three piece BNC connectors for both RG-59 and RG-58 Coax Cable.

The T18R is a long, thin plastic fastening device that locks when the point on one end is threaded through the loop on the other.

The T30R is a long, thin plastic fastening device that locks when the point on one end is threaded through the loop on the other.

The T50L is a long, thin plastic fastening device that locks when the point on one end is threaded through the loop on the other.

The T50R is a long, thin plastic fastening device that locks when the point on one end is threaded through the loop on the other.

Coach Screws And Plugs

The Fibre 5.5' Kevlar Scissors are specially designed to cut kevlar strength members which can be found in fibre optic cables. They feature anti-impact grips designed for comfortable holding and the stainless steel blades are sharp, durable and thick to resist bending, preventing the aramid fibres from getting between the blades.

The fibre optic cable stripper is a stripping tool used for stripping the cladding and buffer on a fiber core with a diameter of 250um and 125um. Comfortable grips for reduction of fatigue in long hours of use. The tool has a lock to keep grips closed for easy storage in tool bags.

The fibre optic sheath stripper is an adjustable cable stripper for round, standard wire, multi-conductor cable, as well as irregular, out of shape cable from 22AWG up to 9.5mm in diameter.

The glue sticks are commonly used for sealing outdoor enclosures or keeping wiring in position on walls or ceilings. The glue sticks can be used with most glue guns.

The cable stripping tool by Linkbasic is designed to reduce the time required to prepare both coaxial and twisted-pair cable for termination.

The UTP Cable Tester by Linkbasic allows you to inspect/test network cable wire by wire.

The UTP Ratchet Crimp tool by Linkbasic is used for crimping UTP RJ45 connectors. This rugged, heavy-duty tool is used to crimp, strip and cut UTP or Modular Cable.

This versatile Krone Punch Down Tool by Linkbasic terminates and trims wires with one punch. It's the only tool you'll need to add, change or remove Krone connections.

The M10 Sleeve Anchor is a thin walled anchor, for use in most types of masonry or concrete

M12 Rawlbolt

The Sleeve Anchor is a thin walled anchor, for use in most types of masonry or concrete