This 60CM Parabolic Dish RF Shield simply bolts onto an existing installation, eliminating the need to realign your link. The antenna shield is constructed from light-weight 1.2mm Aluminium for durability.

The BRA-ECO is an Economy Mast Bracket.

The BRA-FM is a heavy duty flush mount bracket that can be used for applications that require a rock steady installation. Clamps are included to avoid any wear and tear on your masts.

Our ANT-P2 is a 50mm Galvanised Mast of 2 metres.

Galvanised 50mm Mast 3M

Our ANT-P1 is a 50mm Galvanised Mast of 6 metres.

The BRA-GM is a Ground Mount Bracket, 1000 x 50mm.

MikroTik RouterBOARD's SXTsq 5 ac is a compact, light-weight, outdoor, 5GHz, 802.11ac wireless device. It features an integrated antenna and is ideal for point-to-point links or as a CPE unit. The device includes one 10/100/1000 Mbit Ethernet port, enabling full utilisation of the speed 802.11ac protocol provides. The RB-SXTSQ5AC retains a 16 dBi antenna while the physical size has been dramatically reduced - the SXTsq is two times thinner than the SXT 5. The weather-proof enclosure includes slots to directly attach a hose-clamp-mount in three different mounting places, with the added ability to also be mounted on horizontal railings. It's easily accessible grounding connection protects it against lightning.

MikroTik RouterBOARD's cAP lite is a tiny access point device, ideal for public locations and hospitality areas like hotels, airports, shopping malls etc. Included with the product are two different casings, which can be swapped out easily. You also have the capability to custom design the casing by using the included 3D printer friendly design files. The cAP lite supports 802.11b/g/n and can be powered by power over Ethernet. It’s the ideal companion for the MikroTik CAPsMAN (controlled AP system manager), allowing you to control all your AP devices from one central location. The cAP lite can also be used as a stand alone access point with the full potential of RouterOS.

TNW's RB-BASEBOX2, by MikroTik RouterBoard is an outdoor 2.4Ghz wireless device, based on MikroTik's popular RB912 model, fitted with two SMA connectors for antennas, and a cable hood for protection against moisture. Also available are three additional places for antenna connectors, should you wish to use the BaseBox miniPCIe slot for one more wireless interface to make a dual band device, or a 3G/4G modem. The case can be opened with one hand, and is protected against the elements. USB, Ethernet and a Grounding wire exits are provided on the bottom, behind a protective door. It comes with a mounting loop for tower/pole mounting, and a separate DIN rail mount is also provided. Package also includes a PoE injector and power supply unit.

MikroTik RouterBoard's RB-HAPACL, Tower Case hAP ac lite is a Dual-concurrent Access Point, that provides simultaneous WiFi coverage for both 2.4GHz and 5GHz frequencies. It is equipped with a 650MHz CPU, 64MB RAM, five 10/100Mbps Ethernet ports (PoE output on port #5), dual-chain 802.11b/g/n 2.4GHz wireless, single chain 802.11ac 5GHz wireless, USB port for 3G/4G modem and a RouterOS L4 license.

MikroTik RouterBoard's RB-HAPLTC, Tower Case HAP (home Access Point) Light is an ideal device for your apartment, house or office. It supports button triggered WPS, eliminating the need for visitors or once-off users to type complicated passwords to gain wireless Internet access. It can also be made to change to cAP mode and join a CAPsMAN centrally managed network by the push of a button. The device runs RouterOS with all the features, bandwidth shaping, firewall, user access control and many others. The hAP lite is equipped with a powerful 650MHz CPU, 32MB RAM, dual chain 2.4GHz onboard wireless, four Fast Ethernet ports and a RouterOS L4 license. USB power supply is included.

MikroTik RouterBOARD's hAP mini is a small 2GHz wireless access point for home or small offices. It has three configurable ports, one Internet port and two LAN ports, these can be reconfigured as desired. The unit is powered by microUSB and measures only 8 cm tall. The hAP mini is powerful, using the QCA9533 CPU, similar to the bigger hAP units. The device features a built-in, omni-directional antenna and does not have a strict limitation on the number of connected clients. It works in 2GHz and supports 802.11b/g/n standards.

MikroTik RouterBoard's RB-SXTLTE is made to improve signal levels for maximum performance and is ideal for remote locations where cellular coverage is limited. Designed to be installed outdoors with embedded Qualcomm Atheros LTE chipset and integrated MIMO antennas which do not suffer from additional cable losses. In comparison with the first generation model, the SXT LTE kit is powered by a more powerful CPU, supports 150Mbps download speeds with built-in support for 2G and 3G and now supports International LTE Bands (1, 2, 3, 7, 8, 20, 38 and 40.) The unit is equipped with two Ethernet ports, the second offering passive PoE passthrough allowing you to power up another device. The unit is shipped with a 24V power supply, but supports PoE input of 18-57V and is 802.3af/at compliant.

MikroTik RouterBoard's RB-SXTSQ2 is a compact and lightweight outdoor wireless device with an integrated antenna. Ideal for point-to-point links or as a CPE unit. It is compact, weatherproof and easy to mount. The RB-SXTSQ2 retains a 10dBi antenna, the antenna design has been improved and the physical size has been reduced.

MikroTik RouterBoard's RB-CAPAC is a very capable and powerful wireless access point that looks beautiful on both walls and ceilings. The concurrent dual band wireless radio supports dual chain 2 GHz and 5 GHz in 802.11ac and legacy standards, and will provide coverage in 360 degrees around it. Even though the radio supports repeater mode, the two Ethernet ports give you the ability to extend your network with cables, even if PoE power is required, since the cAP ac supports 802.3af/at PoE input on the first port, and passive PoE output (up to 57V) on the second port. The cAP ac is a feature packed device with a sleek enclosure, that can become inconspicuous with sounds at it’s default configuration, but can be reconfigured to launch any RouterOS script. The device comes bundled with two enclosures, so you can choose the design you like best.

The BRA-PC, parallel clamp, allows for an off-set on any existing mast installation. This will give you more space when working with larger equipment that requires space in between your mast and the device being mounted. Clamps are included to avoid any wear and tear on your masts.

The NanoBridge Shield simply attaches onto an existing installation, eliminating the need to realign your link. The antenna shield is constructed from light-weight 1.2mm Aluminium for durability.

The BRA-T150 is a 150mm T-bracket that provides a more than robust approach to your mast installation. We recommend two brackets per installation. Clamps are included to avoid any wear and tear on your masts.

The BRA-T300, 300mm T-bracket provides a more than robust approach to your mast installation.